Download Air Climber Owners Manual Free

• Personal Climber Owner’s Manual Tectrix Fitness Equipment 68 Fairbanks Irvine, California 92618 (800) 767-8082 (714) 380-8082. • FIGURE A - Grounded Outlet Parts of Personal Climber are covered by U.S. Patent numbers: 4,938,474 and 4,949,993. Tectrix is a registered trademark of Tectrix Fitness Equipment, Irvine California. • Fitness Test Custom Program Designing a Custom Program Using a Custom Program CHAPTER 5 - THE HEART RATE PROGRAM CHAPTER 6 - TESTING THE PERSONAL CLIMBER APPENDIX A - CLIMBER LEVEL TO SPEED CONVERSION APPENDIX B - SPEED AND ENERGY CONVERSIONS. • Personal Climber for your regular workout.

Besides this introduction, this book contains: Chapter 2 - Assembly and Setup Everything about getting the Personal Climber ready to use, from taking it out of its shipping crate to setting its operation options. • Page 2 Chapter 1 - Introduction Chapter 3 - Let’s Climb How to use the Personal Climber. Starting a workout, choosing a program, the console display, and more.

Chapter 4 - Advanced Workouts Using the calorie goal, racing, fitness test, and custom workout features. • CHAPTER 2 - ASSEMBLY AND SETUP This chapter describes how to unpack and assemble your Personal Climber, and how to use setup mode to configure the climber for your situation. Assembly Overview It’s easy to assemble the Personal Climber—it will probably take about 30 minutes. Lamescan 3 release 11 free download 2017. You need these common tools: •. • 5/16” x 2.5” Button Cap Screw 41138 Bracket, Handrail Clamp 52078 #10 x 3/4” Phillips-head Screw 41009 The console and related materials for the Personal Climber are packed in the Configuration Kit included with the unit.

This box contains: Description Part Number Warranty Card 03006 Owner’s Manual. • Personal Climber Owner’s Manual Page 5 Assembling the Personal Climber Attach the Feet to the Base Carefully turn the base (1) upside down. Attach the left (2) and right (3) feet using three of the 5/16” by 2.25” screws (9) and washers (10), and one 5/16” nut (11). Attach the front foot using two of the 5/16”.

• Page 6 Chapter 2 - Assembly and Setup Attach the Display Upright Attach the display upright (5) to the base (1) using two 5/16” by 2” screws (8) and washers (10) as shown in Figure 2. Be sure the ribbon cable goes through the slot, as shown, and the display. • Personal Climber Owner’s Manual Page 7 Attach the Handrails Slip the left (6) and right (7) handrails over the plugs on the top of the rear feet. They will probably fit tightly; if necessary, use a spray cleaner as a lubricant.

Windows xp sp2 dengan serial number. Rotate the handrails into the clamp bracket at the top of the display console upright (5). • Plug in the Display Cable Lay the Personal Climber on its right side. Take the lower end of the display ribbon cable (the one you routed through the slot in the base when attaching the display upright). Fold around the motor and plug it into the connector on the power board. • Personal Climber drive cables.

Air Compressor Manuals. Note: To view these manuals (.pdf) on your computer, please install Adobe Reader (Click Here). Manuals free download - Doka Manuals, YASKAWA Manuals, Manuals for KTM, and many more programs. Manuals free download - Doka Manuals, YASKAWA.